JungleDawn Logo White

USING CUTTING EDGE TECHNOLOGY!

NO STRIPES NO PURPLE COLOUR NO HAZING JUST PURE FULL SPECTRUM ENERGY

The Arcadia Reptile Jungle Dawn LED BAR is sleek, bold, powerful and able to deliver the energy that is needed to allow plants to grow by increasing visible light levels within terraria. This clever system uses the very latest ‘High OutPut’ LED diodes to create an almighty 130+ lumens per watt. Use a bar on top of a mesh or fit a bar inside of a vivarium.

LED Configuration

The configuration of an LEDs within a lamp is just as important as its spectrum and output in terms of potential plant growth and illuminated area.

As with all life, plants are reliant on the quantity and quality of energy that is available to them via a light source. The greater the quantity of light, and over a wide enough area equates to better potential results.

A light source of any type can only produce a certain number of photons (parcels/packages of energy) as ‘total light output’. As light travels forwards it starts to spread out to cover a greater area. The further away a lamp is placed, the greater the area is that will be covered with light. This is a sharing or spreading of energy over a target, therefore the measured energy within light becomes weaker the further away a lamp is from the target.

To ensure that we have the maximum amount of light possible entering an enclosure we must use enough diodes, placed at the correct distance from each other and with a suitable spectrum, colour and lumen output.

A reduction in the number of diodes, regardless of rated wattage can equate to ‘zoning’, areas that are very bright and areas that are darker.

We must ensure that all light sources project a ‘flood’, this provides better results and reduces any risk of ocular damage associated with point source lamps.

The configuration of an LEDs within a lamp is just as important as its spectrum and output in terms of potential plant growth and illuminated area. As with all life, plants are reliant on the quantity and quality of energy that is available to them via a light source. The greater the quantity of light, and over a wide enough area equates to better potential results. A light source of any type can only produce a certain number of photons (parcels/packages of energy) as ‘total light output’. As light travels forwards it starts to spread out to cover a greater area. The further away a lamp is placed, the greater the area is that will be covered with light. This is a sharing or spreading of energy over a target, therefore the measured energy within light becomes weaker the further away a lamp is from the target.

OPTIONS:

Jungle Dawn 18 watt LED bar

18 watts

2534 lumens

138 lumens per watt

6200 Kelvin

30 cm long

Jungle Dawn 24 watt LED bar

24 watts

3447 lumens

138 lumens per watt

6200 Kelvin

48 cm long

Jungle Dawn 39 watt LED bar

39 watts

5700 lumens

148 lumens per watt

6200 Kelvin

58 cm long

Jungle Dawn 54 watt LED bar

54 watts

7900 lumens

148 lumens per watt

6200 Kelvin

88 cm long

Jungle Dawn 80 watt LED bar

80 watts

11840 lumens

148 lumens per watt

6200 Kelvin

118 cm long